Denaco Imports Limited
The home of Polydur
Polydur Laminating System - BS 476:Part 7 Class 1 Fire Certification
BS 476:Part 7 Class 1 Fire Certification
This test shows how the spread of flame across the surface of a material gives an indication as to its ability to spread fire. The sample is mounted in a water-cooled holder and exposed to the radiant panel for 10 minutes with a pilot flame applied for the first minute of the test. The progression of the flame front is measured after 1.5 minutes and at the end of the test. The test grades material from 1 (best) down to 4 (worst).Polydur achieved a Class 1 certification.
The test results relate only to the behaviour of the test specimens of the product under the particular conditions of test; they are not intended to be the sole criterion for assessing the potential fire hazard of the product in use.
Click on the links below to open the Fire Certification document. You will require Adobe Reader to open them. If you don't have it click on the icon below to download it FREE!.
Welcome
Navigation:
- Home Page
- Polydur Versatility
Polydur Versatility 1- Polydur Versatility 2
- Polydur Versatility 3
- Polydur Typical Projects
- Polydur Project 1
- Polydur Project 2
- Polydur Project 3
- Working Procedure
- Working Procedures 1
- Working Procedures 2
- Working Procedures 3
- Working Procedures 4
- Document Downloads
Health & Safety- Working Procedures
- Technical Information
- BS 476:Part 7 Class 1
- Distributors
- Contact Us
- Form of Supply
- Links
Site news:
Contact us | Back to top
© 2008 Denaco Imports Limited